EGU2020-171
https://doi.org/10.5194/egusphere-egu2020-171
EGU General Assembly 2020
© Author(s) 2023. This work is distributed under
the Creative Commons Attribution 4.0 License.

Soil organic matter and phosphate sorption on natural and synthetic Fe oxides under in situ conditions

Lydia Pohl1,2, Kristof Dorau3, Christopher Just1, Carmen Höschen1, Kristian Ufer4, Tim Mansfeldt3, and Carsten W. Mueller1
Lydia Pohl et al.
  • 1Chair of Soil Science, Technical University of Munich, Freising, Germany (lydia.pohl@wzw.tum.de)
  • 2Chair of Soil Protection and Recultivation, Brandenburg University of Technology Cottbus-Senftenberg, Cottbus, Germany
  • 3Institute of Geography, Department of Geosciences, University of Cologne, Cologne, Germany
  • 4Federal Institute for Geosciences and Natural Resources (BGR), Hannover, Germany

In redoximorphic soils, iron (Fe) and manganese (Mn) oxides undergo reduction with subsequent oxidation of their reduced counterparts (Fe2+ and Mn2+) impacting nutrient sorption and the stability of soil organic matter (SOM). One tool to investigate the soil redox status is the indicator of reduction in soils (IRIS) method. Thereby, synthetic Fe and Mn oxides are coated onto polyvinyl chloride (PVC) bars, which are typically installed for an operator-defined period in the soil. After removal of the bars we studied organo-mineral associations, which have been formed under field conditions on the surface of the coated bars.

In this study, each one Mn and Fe oxide-coated redox bar were installed for 30 days in a Mollic Gleysol. A previous study revealed, that the Mn oxide coating facilitated a non-enzymatic redox reaction under anoxic conditions, while Fe2+ from the soil solution is oxidized to Fe3+ along the Mn oxide coating and Mn2+ is removed from the PVC surface [1]. In consequence, in situ Fe oxides formed along the Mn oxide coatings and were further considered as ‘natural’ Fe oxides. This enables us to differentiate between sorption occurring onto the surfaces of ‘synthetic’ Fe oxides from the Fe bar versus ‘natural’ formed Fe oxides along the Mn bar. They were analysed by nanoscale secondary ion mass spectrometry (NanoSIMS) to study the distribution of Fe (56Fe16O), SOM (12C14N), and phosphorus (31P16O2). NanoSIMS is a spectromicroscopic technique offering a high lateral resolution of about 100 nm, while having a great sensitivity for light elements. In contrast to classic bulk analysis, it offers the possibility to examine the spatial distribution of SOM and phosphorous at the microscale within the intact organo-mineral matrix. 

Image analysis of individual Fe oxide particles revealed a close association of Fe, SOM, and P resulting in coverage values up to 71% for synthetic and natural iron oxides. Furthermore, ion ratios between sorbent (56Fe16O) and sorbate (12C14N; 31P16O2) were smaller along the natural oxides when compared with those for synthetic Fe oxides. We conclude that both natural and synthetic Fe oxides rapidly sequestered SOM and P (i.e., within 30 days) but that newly, natural formed Fe oxides sorbed more SOM and P than synthetic Fe oxides.

 

[1] Dorau, K.; Eickmeier, M.; Mansfeldt, T. Comparison of Manganese and Iron Oxide-Coated Redox Bars for Characterization of the Redox Status in Wetland Soils. Wetlands 2016, 36, 133–144.

How to cite: Pohl, L., Dorau, K., Just, C., Höschen, C., Ufer, K., Mansfeldt, T., and Mueller, C. W.: Soil organic matter and phosphate sorption on natural and synthetic Fe oxides under in situ conditions , EGU General Assembly 2020, Online, 4–8 May 2020, EGU2020-171, https://doi.org/10.5194/egusphere-egu2020-171, 2020.

Displays

Display file