EGU2020-2515
https://doi.org/10.5194/egusphere-egu2020-2515
EGU General Assembly 2020
© Author(s) 2020. This work is distributed under
the Creative Commons Attribution 4.0 License.

Real-time earthquake hazard assessment based on high-rate GNSS PPPAR

Yang Jiang1, Yang Gao2, and Michael Sideris3
Yang Jiang et al.
  • 1University of Calgary, Schulich School of Engineering, Department of Geomatics Engineering, Canada (yang.jiang1@ucalgary.ca)
  • 2University of Calgary, Schulich School of Engineering, Department of Geomatics Engineering, Canada (ygao@ucalgary.ca)
  • 3University of Calgary, Schulich School of Engineering, Department of Geomatics Engineering, Canada (sideris@ucalgary.ca)

To provide hazard assessment in rapid or real-time mode, accelerations due to seismic waves have traditionally been recorded by seismometers. Another approach, based on the Global Navigation Satellite System (GNSS), known as GNSS seismology, has become increasingly accurate and reliable. In the past decade, significant improvements have been made in high-rate GNSS using precise point positioning and its ambiguity resolution (PPPAR). To reach cm-level accuracy, however, PPPAR requires specific products, including satellite orbit/clock corrections and phase/code biases generated by large GNSS networks. Therefore, the use of PPPAR in real-time seismology applications has been inhibited by the limitations in product accessibility, latency, and accuracy. To minimize the implementation barrier for ordinary global users, the Centre National D’Etudes Spatiales (CNES) in France has launched a public PPPAR correction service via real-time internet streams. Broadcasting via the real-time service (RTS) of the international GNSS service (IGS), the correction stream is freely provided. Therefore, in our work, a new approach using PPPAR assisted with the CNES product to process high-rate in-field GNSS measurements is proposed for real-time earthquake hazard assessment. A case study is presented for the Ridgecrest, California earthquake sequence in 2019. The general performance of our approach is evaluated by assessing the quality of the resulting waveforms against publicly available post-processing GNSS results from a previous study by Melgar et al. (2019), Seismol. Res. Lett. XX, 1–9, doi: 10.1785/ 0220190223. Even though the derived real-time displacements are noisy due to the accuracy limitation of the CNES product, the results show a cm-level agreement with the provided post-processed control values in terms of root-mean-square (RMS) values in time and frequency domain, as well as seismic features of peak-ground-displacement (PGD) and peak-ground-velocity (PGV). Overall, we have shown that high-rate GNSS processing based on PPPAR via a freely accessible service like CNES is a reliable approach that can be utilized for real-time seismic hazard assessment.

How to cite: Jiang, Y., Gao, Y., and Sideris, M.: Real-time earthquake hazard assessment based on high-rate GNSS PPPAR, EGU General Assembly 2020, Online, 4–8 May 2020, EGU2020-2515, https://doi.org/10.5194/egusphere-egu2020-2515, 2020

Displays

Display file