EGU2020-642
https://doi.org/10.5194/egusphere-egu2020-642
EGU General Assembly 2020
© Author(s) 2020. This work is distributed under
the Creative Commons Attribution 4.0 License.

Understanding factors influencing the wetland parameters of a monthly rainfall-runoff model in the Upper Congo River basin

Pierre Kabuya1,2, Denis Hughes1, Raphael Tshimanga2, and Mark Trigg3
Pierre Kabuya et al.
  • 1Rhodes University, Science Faculty, Institute for water research, South Africa (kabuyabal@gmail.com)
  • 2Congo Basin Water Resources Research Center (CRREBaC) & Department of Natural Resources Management, University of Kinshasa, Kinshasa, DRC
  • 3School of Civil Engineering, University of Leeds, Leeds LS2 9JT, UK

Wetland processes considerably influence the flow regime of the downstream river channel, and are important to consider for a better representation of runoff generation within a basin scale hydrological model. The need to understand these processes lead to the development of a wetland sub-model for the monthly time step Pitman hydrological model. However, previous studies highlighted the need to provide guidance to explicitly estimate the wetland parameters rather than using a trial and error calibration approach. In this study, a 2D hydrodynamic river-wetland model (LISFLOOD-FP) is used to explicitly represent the inundation process exchanges between river channels and wetland systems and thereby inform the choice of Pitman wetland model parameters. The hysteretic patterns of these river-wetland processes are quantified through the use of hysteresis indices. Additionally, the hysteretic patterns are connected with the spill and return flow parameters of the wetland sub-model and eventually with the wetland morphometric characteristics. The results show that there is a consistent connection between the degree of hysteresis found in the channel-wetland exchange processes and the Pitman wetland parameters which are also explicitly linked to the wetland morphometric characteristics. The channel capacity to spill (Qcap) is consistently correlated with the hysteresis found between the channel inflow and the wetland storage volume. This anti-clockwise hysteresis represents the time delay between the inundation and drainage processes. The channel spill factor (QSF), in addition to the inundation processes, is also connected with the drainage processes represented by the wetland storage volume and channel outflow anti-clockwise hysteresis. On the other hand, the parameters of the return flow equation have shown a strong consistent relationship with the channel inflow-wetland storage hysteresis. It has also been observed that the wetland average surface slope and the proportion of the wetland storage below the channel banks are the morphometric characteristics that influence the spill and the return flow parameters of the Pitman wetland sub-model. This understanding has a practical advantage for the estimation of the Pitman wetland parameters in the many areas where it is not possible to run complex hydrodynamic models.

How to cite: Kabuya, P., Hughes, D., Tshimanga, R., and Trigg, M.: Understanding factors influencing the wetland parameters of a monthly rainfall-runoff model in the Upper Congo River basin, EGU General Assembly 2020, Online, 4–8 May 2020, EGU2020-642, https://doi.org/10.5194/egusphere-egu2020-642, 2019

Displays

Display file