EGU2020-8458
https://doi.org/10.5194/egusphere-egu2020-8458
EGU General Assembly 2020
© Author(s) 2021. This work is distributed under
the Creative Commons Attribution 4.0 License.

TanDEM-X for Cryosphere Applications

Irena Hajnsek1,2, Georg Fischer1, Giuseppe Parrella1, Philipp Bernhard2, and Silvan Leinss2
Irena Hajnsek et al.
  • 1German Aerospace Center, Mircowaves and Radar Institute, Wessling, Germany (irena.hajnsek@dlr.de)
  • 2ETH Zurich, Institute of Environmental Engineering, Earth Observation, Switzerland (hajnsek@ifu.baug.ethz.ch)

In this presentation the focus is laid on cryospheric applications served by the single-pass interferometer TanDEM-X. The German Radar mission TanDEM-X (TerraSAR-X add-on for Digital Elevation Measurement) is already successfully in operation since 2010 and is delivering continuously data over the Earth surfaces.

The main mission objective was the generation of a global and consistent digital elevation model (DEM) with a spatial resolution of 12m and a relative vertical height accuracy of 2 m. For this at least two global acquisitions where needed and innovative algorithms where developed to process the data into a global high resolution DEM. In addition to the high resolution DEM also a 90-m DEM was generated to facilitate the comparability with the former SRTM DEM. Beyond the generation of DEMs super-test sites have been establish to collect continuously data over a limited area of interest and to demonstrate and develop new algorithms to support application development. In addition TanDEM-X supports the demonstration and application of new SAR techniques, with focus on multi-static SAR, polarimetric SAR interferometry, digital beam forming and super resolution.

Today it is known through observations, delivered by satellites and conventional observing systems that the Cryosphere reacts very sensitively to climate change. However, the feedbacks to the global climate system are not well understood, impairing predictions of the impact of future climate change. Improved observational data have been provided to better quantify the main cryospheric processes and improve the representation of the Cryosphere in climate models. TanDEM-X data (product but also interferometric data) have been used from an international science team for a diversity of cryosphere applications. The presentation will provide an overview of the operation status of TanDEM-X and will focus on the applied cryopheric applications so far applied. Examples of the detection of permafrost features, the estimation of the firn-line zone, derivation of vertical ice structure, the mass loses of  over ice sheets and sea ice height estimation will be presented.

How to cite: Hajnsek, I., Fischer, G., Parrella, G., Bernhard, P., and Leinss, S.: TanDEM-X for Cryosphere Applications, EGU General Assembly 2020, Online, 4–8 May 2020, EGU2020-8458, https://doi.org/10.5194/egusphere-egu2020-8458, 2020.

Displays

Display file