EGU2020-8584
https://doi.org/10.5194/egusphere-egu2020-8584
EGU General Assembly 2020
© Author(s) 2022. This work is distributed under
the Creative Commons Attribution 4.0 License.

European drillability mapping for shallow geothermal applications

Antonio Galgaro1, Eloisa Di Sipio1, Giorgia Dalla Santa1, Adela Ramos Escudero2, Jose Manuel Cuevas3, Burkhard Sanner4, Davide Righini5, Riccardo Pasquali6, Jacques Vercruysse7, David Bertermann8, Luc Pockele9, and Adriana Bernardi10
Antonio Galgaro et al.
  • 1Università degli Studi di Padova, Department of Geosciences, Padova, Italy
  • 2Universidad Politécnica de Cartagena, Cartagena, Spain
  • 3Instituto de Aplicaciones de las Comunicaciones Avanzadas (ITACA), Universitat Politècnica de València, Valencia, Spain
  • 4UBeG Dr. Mands & Sauer GbR, Reinbergstr 2, 35580 Wetzlar, Germany
  • 5Hydra srl, Traghetto di Argenta, Ferrara, Italy
  • 6SLR Environmental Consulting Ireland Ltd., Windy Arbour, Ireland
  • 7GEO-GREEN sprl, Marbais, Belgium
  • 8GeoZentrum Nordbayern, Friedrich-Alexander-University, Erlangen, Germany
  • 9R.E.D srl, Teolo, Padova, Italy
  • 10CNR-ISAC, Padova, Italy

The overall goal of the EU funded project GEO4CIVHIC is the development of more efficient and low cost geothermal systems for conditioning retrofitting civil and historical buildings.

The assessment of the most suitable drilling technology for a given geological context could be very useful from both the technical and the economic point of view. In fact, the installation costs are one of the main economical barrier for a wider application of shallow geothermal systems, and they are mainly covered by the drilling time and costs (drilling machine and labour costs).

Generally, the drilling technology suitable on a given site and the related most proper ground heat exchanger are mainly dictated by the local stratigraphy (kind of materials/rocks, state of consolidation) and the local hydrogeological conditions, also affecting the drilling times and costs by requiring the application or not of the casing.

The ‘drillability’ concept has been defined as the prediction of the most suitable drilling technique related to a given underground for a certain borehole heat exchanger type, by taking into account the estimated drilling and installation time. Therefore, a ‘drillability’ map has been conceived at European scale in order to support the preliminary design phase of new ground source heat pump systems and to provide a first evaluation of the drilling costs and time for a given location. The map is based on the European geological map released by the European Geological Data Infrastructure (EGDI), freely available in the web, that complies with the INSPIRE (INfrastructure for Spatial InfoRmation in Europe) Directive. It is an ESRI Shape (vector file), Scale 1:1.500.000, Projection ETRS 1989 LCC. The EGDI map is connected to a list that collect all the geological context that can be found all around Europe; the list contains 203 different geological settings. The association among ‘drillability’ techniques and geological sequence was conducted by considering the knowledge of the partners that are expert in drilling operations in several European countries.

The classical drilling methods are here distinct into percussing, rotating, and combined percussion-rotation methods. The proposed map compares traditional drilling methods usually applied to install vertical ground heat exchangers as the rotary drilling with tricone or chevron bit and the traditional down-hole hammer (with or without casing) with the new drilling techniques developed within the EU funded project Cheap-GSHPs and GEO4CIVHIC.

So far a first ‘drillability’ map has been released with the drilling time and costs; further development will report the regulatory constraints related to drilling in specific areas.

The ‘drillability’ map at European scale is connected to a ‘drillability’ app still under development that will provide a first assessment of the most suitable drilling technique in a specific geological context both to direct users such as designers, drillers, administrators. Depending on the local geology identified by the users, the app will help to estimate the required drilling time and related costs, providing a preliminary information to start decision making and authorization processes.

Goo4Civhic Project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 792355.

How to cite: Galgaro, A., Di Sipio, E., Dalla Santa, G., Ramos Escudero, A., Cuevas, J. M., Sanner, B., Righini, D., Pasquali, R., Vercruysse, J., Bertermann, D., Pockele, L., and Bernardi, A.: European drillability mapping for shallow geothermal applications , EGU General Assembly 2020, Online, 4–8 May 2020, EGU2020-8584, https://doi.org/10.5194/egusphere-egu2020-8584, 2020.