EGU22-3168
https://doi.org/10.5194/egusphere-egu22-3168
EGU General Assembly 2022
© Author(s) 2022. This work is distributed under
the Creative Commons Attribution 4.0 License.

Thermodynamic analysis of the olivenite-libethenite solid solution

Juraj Majzlan1, Martin Števko2, Alexandra Plumhoff1, Edgar Dachs3, and Artur Benisek3
Juraj Majzlan et al.
  • 1(juraj.majzlan@uni-jena.de) Institute of Geosciences, Friedrich-Schiller University, Burgweg 11, 07749 Jena, Germany
  • 2(martin.stevko@savba.sk) Earth Science Institute, Slovak Academy of Sciences, Dúbravská cesta 9, 84101 Bratislava, Slovakia
  • 3(Edgar.Dachs@sbg.ac.at) Department of Chemistry and Physics of Materials, University of Salzburg, Jakob-Haringer-Strasse 2a, 5020 Salzburg, Austria

Minerals of the olivenite-libethenite [Cu2(AsO4)(OH)-Cu2(PO4)(OH)] group appear at many sites with secondary copper oxysalts. Their structural arrangement seems to be particularly stable and is also found in minerals in other classes, such as in andalusite or kieserite. Thermodynamic properties of the end members were investigated before and suggest that olivenite is the most stable Cu arsenate. In this contribution, we inspected in a detail the solid solution series between olivenite and libethenite.

Samples used in this work were synthetic, prepared from aqueous solutions with Cu(NO3)2, (NH4)H2PO4, and Na2HAsO4. Chemical composition of the members of the olivenite-libethenite solid solution were determined by ICP-OES. The relative proportions of the cations (As/P) differ little from the initial ratios in the parental solutions. For libethenite and a few solid-solution members, the orthorhombic space group Pnnm was taken for the refinement of the powder XRD data. For olivenite and the remaining, most solid-solution members, the monoclinic space group P21/n yielded slightly better results. Acid solution calorimetry in 5 N HCl showed that the solid solution is thermodynamically non-ideal, with positive enthalpies of mixing. The data indicate slight asymmetry and can be fit by a function Hex = Xoli·Xlib [A + B(Xoli – Xlib)], where Xoli and Xlib are the mole fractions of olivenite and libethenite component, respectively, and A = 6.27±0.16 kJ·mol–1, B = 2.90±0.5 kJ·mol–1. The asymmetry and positive excess enthalpies of mixing are confirmed by autocorrelation analysis of Fourier-transform infrared spectra. The results are interpreted as a local heterogeneity that arises from strain relaxation around cations with different sizes (As5+/P5+) in the intermediate members. The length scale of the heterogeneity corresponds to the wavelength of the phonons, on the order of one or a few unit cells. A distinct feature in the Hex data is the sudden drop of the mixing enthalpies between Xlib = 0.7 and 0.8. This feature can be explained by a subtle symmetry change in the solid solution from orthorhombic to monoclinic. The energetic difference between these two configurations is 0.9 kJ·mol–1. Excess entropies are zero within the uncertainties of the measurements, with one exception (at Xlib = 0.2). Excess volumes show a complicated, non-linear dependence on Xlib. Addition of PO4 into olivenite causes contraction of the unit cell, as expected for substitution of a smaller for a smaller cation. On the other side of the solid solution, addition of AsO4 into olivenite causes expansion of the unit cell. The variations of Vex are related to the interplay of cation-size differences and the small driving force between the two related (orthorhombic/monoclinic) structure. The olivenite-libethenite solid solution is non-ideal but the deviation from ideality is too small for a development of a miscibility gap. In nature, the As/(As+P) ratio in such minerals is controlled by geochemical rather than thermodynamic factors.

How to cite: Majzlan, J., Števko, M., Plumhoff, A., Dachs, E., and Benisek, A.: Thermodynamic analysis of the olivenite-libethenite solid solution, EGU General Assembly 2022, Vienna, Austria, 23–27 May 2022, EGU22-3168, https://doi.org/10.5194/egusphere-egu22-3168, 2022.

Displays

Display file