biofilms9-145
https://doi.org/10.5194/biofilms9-145
biofilms 9 conference
© Author(s) 2020. This work is distributed under
the Creative Commons Attribution 4.0 License.

Pseudomonas Fluorescens biofilm in rotating annular bioreactor: formation kinetics and wetting properties

Michela Castigliano1, Maria Petala2, Margaritis Kostoglou3, Stefano Guido1,4, Sergio Caserta1,4, and Thodoris Karapantsios3
Michela Castigliano et al.
  • 1University of Naples Federico II, University of Naples Federico II, Chemical, Materials and Production Engineering, Italy
  • 2School of Civil Engineering, University Box 10, 54 124 Thessaloniki (Greece).
  • 3Division of Chemical Technology, School of Chemistry, Aristotle University of Thessaloniki, University Box 116, 541 24 Thessaloniki (Greece).
  • 4CEINGE, Advanced Biotechnologies, 80145 Naples (Italy) (steguido@unina.it)

Biofilms are bacterial communities embedded in an extracellular matrix, able to adhere to surfaces. A deeper knowledge of the biofilm as a whole will aid the development of efficient methods to control deleterious biofilms (clinical biofilms, biofouling) or to enhance beneficial ones (waste-water treatment, bio-filtration). P. fluorescens has been widely studied, this strain produces bioactive secondary metabolites, and forms biofilms[1]. Several experimental set-ups have been widely used for in vitro biofilm cultivation of P. fluorescens, even if a deep characterization among different culture conditions is still lacking in the literature. This work, based on previous studies[2], is focused on the investigation of growth conditions on biofilm structure and properties. Growth kinetics of P. fluorescens biofilms was characterized in vitro under stagnant and flow-controlled conditions, using a rotating annular bioreactor. Two different supports in borosilicate glass and polycarbonate have been used. Bacterial growth kinetics has been measured through bio-turbidity analysis and TOC/DOC quantification. Biofilm morphology has been quantified through optical microscopy and image analysis by measuring the fraction of support surface covered by biofilm. The wetting properties of the biofilm layers have been investigated by using an innovative device, named Kerberos®, able to control centrifugal and gravitational forces acting on a single droplet placed on a surface[3]. The evolution of the droplet shape and position was measured as function of the imposed stress, to quantify wetting of different biofilm coated samples, following already assessed methodologies[4]. Different chemo-physical environments, investigated by changing growth medium, physical support, and imposed flow stress, induced different growth kinetics, biofilm morphology, and wetting properties. Accurate experimental measurements allowed us to estimate in a quantitative way the influence of investigated parameters on specific morphologic measurements.


[1] Brittan S. Scales and others, ‘Microbiology, Genomics, and Clinical Significance of the Pseudomonas Fluorescens Species Complex, an Unappreciated Colonizer of Humans’, Clinical Microbiology Reviews, 27.4 (2014), 927–48 <https://doi.org/10.1128/CMR.00044-14>.

[2] Federica Recupido and others, ‘The Role of Flow in Bacterial Biofilm Morphology and Wetting Properties’, Colloids and Surfaces B: Biointerfaces, 2020 <https://doi.org/10.1016/j.colsurfb.2020.111047>.

[3] Sotiris P. Evgenidis and others, ‘Kerberos: A Three Camera Headed Centrifugal/Tilting Device for Studying Wetting/Dewetting under the Influence of Controlled Body Forces’, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2017 <https://doi.org/10.1016/j.colsurfa.2016.07.079>.

[4] Inmaculada Ríos-López and others, ‘Effect of Initial Droplet Shape on the Tangential Force Required for Spreading and Sliding along a Solid Surface’, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2018 <https://doi.org/10.1016/j.colsurfa.2018.04.004>.

How to cite: Castigliano, M., Petala, M., Kostoglou, M., Guido, S., Caserta, S., and Karapantsios, T.: Pseudomonas Fluorescens biofilm in rotating annular bioreactor: formation kinetics and wetting properties, biofilms 9 conference, Karlsruhe, Germany, 29 September–1 Oct 2020, biofilms9-145, https://doi.org/10.5194/biofilms9-145, 2020