biofilms9-153
https://doi.org/10.5194/biofilms9-153
biofilms 9 conference
© Author(s) 2020. This work is distributed under
the Creative Commons Attribution 4.0 License.

Millimetric particles functionalized with biocide to improve biofouling control in RO system

Ana C. Barros, Ana Pereira, and Luís F. Melo
Ana C. Barros et al.
  • Faculty of Engineering of the University of Porto, Laboratory for Process Engineering, Environment , Biotechnology and Energy, Department of Chemical Engineering, Portugal (acbarros@fe.up.pt)

Biofouling is responsible for more than 45% of all membrane fouling associated problems and is highly relevant for the performance of Reverse Osmosis systems (RO). Biofouling has a tremendous negative impact on the quality and quantity of permeate water and is responsible for high operational and maintenance costs associated with such systems. Current strategies targeting biofilm control on membrane systems often include the overuse of disinfectants which most of the time fail to effectively prevent biofouling build-up, can lead to the formation of dangerous disinfection by-products and represents high amounts of discharged biocides.

 

The present work aims to study how millimetric (1-3 mm length) alumina particles, functionalized with a well-known quaternary ammonium compound biocide (benzalkonium chloride) and immobilized into a Particle Biocide Bed Reactor can effectively contribute to mitigate biofilm formation in membrane systems. For that, the functionalized particles were chemically characterized, and their antimicrobial activity was assessed in batch and recirculation assays and quantified in terms of Culturability and Propidium Iodide (PI) uptake. Special attention has been given to biocides’s (free and immobilized) mechanism of action and potential biocide release was evaluated by High Performance Liquid Chromatography (HPLC) measurements.

 

The preliminary experiments indicate that the immobilized biocide (equivalent biocide concentration of 3 g/L) has an antimicrobial activity against Pseudomonas fluorescens (initial concentration 108 CFU/mL) by reducing 4 logs after 30 min and 8 logs after 1 h. On the other hand, the control assays (functionalized particles in water with no bacteria), also shows a biocide release between 0.8 and 1% to the bulk water after 30 min, both in batch and in the Particle Bed Reactor with recirculation experiments. No significant biocide increase is observed in the bulk liquid studies for two weeks. Nonetheless, some changes in the functionalization approach are being made to improve the biocidal anchoring to the particle.

How to cite: Barros, A. C., Pereira, A., and Melo, L. F.: Millimetric particles functionalized with biocide to improve biofouling control in RO system , biofilms 9 conference, Karlsruhe, Germany, 29 September–1 Oct 2020, biofilms9-153, https://doi.org/10.5194/biofilms9-153, 2020