EGU2020-12986
https://doi.org/10.5194/egusphere-egu2020-12986
EGU General Assembly 2020
© Author(s) 2020. This work is distributed under
the Creative Commons Attribution 4.0 License.

First Field-Test results of iGNSS-R instrument of the PRETTY payload

Andreas Dielacher1, Heinz Fragner1, Michael Moritsch1, Jens Wickert2,3, Otto Koudelka4, Per Hoeg5, Estel Cardellach6, Manuel Martin-Neira7, Maximilian Semmling2,8, Roger Walker7, Andreas Hörmer4, and Manuela Wenger4
Andreas Dielacher et al.
  • 1RUAG Space GmbH, Vienna, Austria (andreas.dielacher@ruag.com)
  • 2German Research Centre for Geosciences (GFZ), Potsdam, Germany
  • 3Technische Universität Berlin, Germany
  • 4Graz University of Technology, IKS, Graz, Austria
  • 5University of Oslo (UiO), Department of Physics, Oslo, Norway
  • 6Institute of Space Sciences (ICE-CSIC) and Institut d’Estudis Espacials de Catalunya (IEEC), Barcelona, Spain
  • 7European Space Agency (ESA), Noordwijk, The Netherlands
  • 8Institute for Solar-terrestrial Physics (DLR-SO), Neustrelitz, Germany

The PRETTY mission is a 3U CubeSat mission, hosting two different payloads, a radiation dosimeter and an interferometric GNSS reflectometer. The intended launch is planned in 2022.

The reflectometer payload has been built, using flight representative hardware and mounted inside a portable setup. Two campaigns have been carried out, a first one to verify the setup in real world condition and the second one to record reflectometry data over the Danube river. The reflections over the river are analyzed and compared to a reference data set obtained from basemap.at (which is released under Open Government Data Österreich Lizenz CC-BY 4.0).

The hardware is capable of generating complex and power waveforms at the same time, and the reflection events are visible in both. Since PRETTY is aiming for phase altimetry, only coherent measurements are conducted with an integration time of 20ms .

The re-tracking algorithm for the specular point and height estimation are based on [1]. Due to the low elevation angle and receiver height, the effects from the ionosphere is not considered , however effects from the atmosphere have to be included in the data re-tracking process. The reflection peaks, and the signal to noise ratio of the peaks, are large enough detect the peak and to calculate the height of the reflection point. The height retrieval is shown in the paper.

The results are promising w.r.t. the performance of the overall structure of the PRETTY GNSS-R payload  in order to deliver altimetry results on a low-cost CubeSat platform.

[1] W. Li, E. Cardellach, F. Fabra, S. Ribó and A. Rius, "Assessment of Spaceborne GNSS-R Ocean Altimetry Performance Using CYGNSS Mission Raw Data," in IEEE Transactions on Geoscience and Remote Sensing, vol. 58, no. 1, pp. 238-250, Jan. 2020. doi: 10.1109/TGRS.2019.2936108

How to cite: Dielacher, A., Fragner, H., Moritsch, M., Wickert, J., Koudelka, O., Hoeg, P., Cardellach, E., Martin-Neira, M., Semmling, M., Walker, R., Hörmer, A., and Wenger, M.: First Field-Test results of iGNSS-R instrument of the PRETTY payload, EGU General Assembly 2020, Online, 4–8 May 2020, EGU2020-12986, https://doi.org/10.5194/egusphere-egu2020-12986, 2020

Displays

Display file