Geophysical basin characterization using seismic noise H/V spectral ratio and gravity data (Vallès Basin NE-Spain).
- (anna.gabas@icgc.cat)
Vallès Basin (NE-Spain) is a neogene basin with mainly granitic bedrock and delimited at NW by one normal fault (Vallès fault). This basin presents significant geothermal anomalies reflected with surficial hot thermal waters. Previous studies carried out in the 70s, to define its energy resource potential using one single geophysical technique, were not enough to clearly interpret the subsoil structure and many uncertainties remain still unsolved.
The aim of this work is to combine two different geophysical techniques for collaborative interpretation of the Vallès Basin structure in order to reduce the uncertainties: 2D gravity profiles and seismic noise H/V spectral ratio measurements distributed in the whole basin area. 2D gravity profiles provide subsurface structural information and basement depth from density models obtained after modelling and inversion processes; whereas the seismic noise H/V spectral ratio technique determines the soil fundamental frequency, which helps to locate the boundary between soft sediments and hard rock materials using empirical equations. Therefore, bedrock geometry and infill sediments structure can be estimated, which is crucial to understand ongoing processes related to the surface geothermal evidences.
The work methodology consists of combining both geophysical methods comparing the density models obtained from Bouguer anomaly in the 2D gravity profiles with the soft soil-hard rock contact surface obtained from the seismic noise H/V spectral measurement. The co-validation between them is carried out overlapping these two individual geophysical results and complementing models between them to obtain the best fit. Despite using different geophysical techniques to reduce ambiguities, a final discussion about lithology of sediments, geometry of basement and location of main faults is always needed. In this case, two equally probable models are proposed to interpret the Vallès Basin structure. One of them presents a shallow basin with granitic basement below. The other one presents a deeper basin, the granitic bedrock is located at 2000 m depth, with conglomerate deposits near the main fault. In both cases, the obtained models detect the Vallès fault as a sub-vertical fault which slightly diminishes its slope from 1200-1400 m in depth.
These new results in the Vallès Basin provide valuable information for geothermal purposes, but should be completed with more geophysical data to assure the geological model. As a future work, the gravity data will be extended at the whole basin in order to create a 3D geological model. To accomplish this objective, it will be fundamental to construct a very dense mesh of gravity points (good resolution) which affords a plausible hypothesis about the basin geological structure.
How to cite: Gabàs, A., Macau, A., Bellmunt, F., Benjumea, B., Sedano, J., and Figueras, S.: Geophysical basin characterization using seismic noise H/V spectral ratio and gravity data (Vallès Basin NE-Spain)., EGU General Assembly 2020, Online, 4–8 May 2020, EGU2020-19542, https://doi.org/10.5194/egusphere-egu2020-19542, 2020