Monitoring temperature at the ocean seafloor with fibre optic cables and DAS

Ocean water temperature measurements are fundamental to atmospheric and ocean sciences. Obtaining them, however, often comes along with major experimental and logistic challenges. Except for the uppermost ocean surface temperature, which can be measured from satellites, temperature data of the ocean is often poorly sampled or nonexistent, especially in deep-water regions.

Although Distributed Acoustic Sensing (DAS) technology has become popular because its high sensitivity to strains and mechanical vibrations, our work focuses on its usage on tens-of-kilometer-long underwater fibre-optic (FO) telecommunication cables to measure temperature anomalies at the seafloor at millikelvin (mK) sensitivity. This is possible because of the lack of dominant strain signals at frequencies less than about ∼1 mHz, as well as the poor coupling of the fibre with these signals while remaining highly sensitive to slow ambient temperature variations that locally affect its optical path length. DAS allows us to observe significant temperature anomalies at the continental shelf and slope of the Mediterranean sea, South of Toulon, France over periods of several days, with variability remaining relatively low at the deep ocean. By means of this approach, oceanic processes such as near-inertial internal waves and upwelling can be monitored at unprecedented detail.

Our observations are validated with oceanographic in-situ sensors and alternative Distributed Fibre Optic Sensing (DFOS) technologies established for temperature sensing. We outline key advantages of DAS thermometry over the aforementioned sensors in terms of spatial coverage, sensitivity, versatility and highest attainable frequency. At the current state of the art, DAS can only measure temperature anomalies as opposed to absolute temperature, a drawback that could be compensated via single temperature calibration measurements.