Understanding non-linear ground response with Distributed Dynamic Strain Sensing (DDSS) at Mt. Etna volcano, Sicily.

Mt. Etna, the largest volcano in Europe, is known for its almost persistent activity and complex seismic wavefield, making it an attractive location for examining volcanic explosions and testing new instrumentation in seismology (e.g., rotational sensors, strain-meters, fiber optic sensing). In 2018, a study was conducted at the Pizzi Deneri (PDN) observatory, situated near Mt. Etna’s summit to understand new instrumentation responses to the local seismo-acoustic wavefield. During volcanic explosions the released energy is mainly partitioned into seismic waves traveling through the ground, and sound waves traveling through the atmosphere. To capture this phenomenon, a temporary multi-parameter network comprised of infrasound sensors, broad-band seismometers (BB) and a fiber optic cable buried within the local loosed granular medium (scoria layer). The fiber optic cable was connected to a Distributed Dynamic Strain Sensing (DDSS) interrogator.

At Etna, volcanic explosions were observed at co-located BB, infrasound and DDSS virtual sensors. A notable example(visible in both BB and DDSS data) is the successive occurrence of a 1-2 Hz seismic signal with a duration of ~4 seconds, followed by a ~2 Hz acoustic signal originating from the explosion, recorded at infrasound sensors. Unusually, simultaneous to the arrival of the acoustic signal observed at the infrasound sensors, DDSS and BB sensors record a signal with a frequency content of 15-20 Hz with a duration of ~2 seconds. We hypothesize that the 15-20 Hz signal is resulting from a non-linear ground response due to the air-to-ground coupling of the air pressure wave.

In order to better characterize this phenomenon, a second experiment was conducted in 2019 at PDN with a similar instrumentation as in 2018, but with a different spatial arragenment. During three months the infrasound sensors recorded each about 65000 volcanic explosions. In this work we analyze the respective ground responses of volcanic explosions observed in the DDSS records of the 2019 campaign. We observe similar phenomenon as in 2018 (non-linear ground response), nevertheless, not all explosion can trigger this response. We first characterize the explosion events from both infrasound and DDSS records, and then classify them using their waveform similarity. The preliminary results provide a broad characterization of the non-linear ground response phenomenon and an insight into the physical properties and processes that are necessary for a pressure wave to trigger a non-linear ground response. The outcomes of this work provide a better understanding of acoustic-to-ground energy coupling in volcanic environments and their potential to trigger other hazards.