Detection of Stick-Slip Nucleation and Failure in Homogeneous Glass Beads Using Acoustic Emissions in Ring-Shear Experiments: Implications for Recognizing Acoustic Signals of Earthquake Foreshocks

The acoustic emissions (AEs) produced during the shearing of granular materials reflect the accumulation and release of stress, offering valuable insights into the failure mechanisms of seismic faults and stick-slip-controlled landslides. While various characteristics such as amplitude, energy, counts, and frequency of AE signals generated by stick-slip have been studied, the stress changes corresponding to different frequency AEs at various stages of the stick-slip process remain unclear. This knowledge gap hinders our understanding of the precursory signals leading to stick-slip failure. In order to enhance our comprehension of the physical mechanisms underlying granular stick-slip, we conducted monitoring of both mechanical and AE signals using high-frequency (2 MHz) synchronous acquisition. This was done during the constant-speed shearing of packs containing uniform glass beads of different sizes under varying normal stresses. Our findings revealed an accelerated release rate of AE energy in tandem with sample volume dilatation. Additionally, the stress drop during stick-slip increased with higher normal stress and particle size. This study identified three distinct events during a single cycle of stick-slip: main slip, minor slip, and microslip. We analyzed the AE frequency spectra associated with each of these events. Main slip and minor slip correlated with stress drop, generating high-frequency AEs (approximately several hundred kHz). In contrast, microslip produced lower AE frequencies (around tens of kHz) and exhibited stress strengthening. These characteristics, overlooked in prior studies due to low-frequency acquisition, suggest that microslip is primarily a result of sliding on grain contacts, while main slip and minor slip arise from the breakage and reformation of force chains. The low-frequency AEs from microslip may serve as a crucial precursor to seismic faults and landslides, providing a deeper understanding of the granular stick-slip phenomenon.