3rd International Conference on Tomography of Materials and Structures
26–30 June 2017
Lund, Sweden
Oral programme 3.2
|
3.2 Applications II |
|
Oral programme
/ Wed, 28 Jun, 10:00–12:00
/ 14:30–16:10
/ Room Konsert Salen
/ Thu, 29 Jun, 16:00–17:40 / Room Stora Salen / Fri, 30 Jun, 10:00–12:00 / Room Konsert Salen
Poster programme
/ Attendance Wed, 28 Jun, 16:10–18:30
/ Poster area
|
|
Wednesday, 28 June 2017 Room Konsert Salen |
|
| 10:00–10:20 |
ICTMS2017-6
Characterization of 3D fatigue damage mechanisms of a cast Al alloy during in-situ high temperature low cycle fatigue tests using synchrotron X-ray Tomography and digital volume correlation Nora Dahdah, Nathalie Limodin, Ahmed El Bartali, Jean-François Witz, Eric Charkaluk, and Jean-Yves Buffiere |
| 10:20–10:40 |
ICTMS2017-129
Effect of 3D Crystallographic Orientation and Underlying Microstructure on Evolution of Corrosion in Aluminum Alloys Hrishikesh Bale, Tyler Stannard, Nikhilesh Chawla, Jeff Gelb, Arno Merkle, and Erik Lauridsen |
| 10:40–11:00 |
ICTMS2017-125
Probing 4D Microstructural Evolution in Aluminum alloys using Transmission X-Ray Microscopy (TXM) Chandrashekara Shashank Kaira, Vincent De Andrade, Sudhanshu S. Singh, Christopher Kantzos, Francesco De Carlo, and Nikhilesh Chawla |
| 11:00–11:20 |
ICTMS2017-8
Measuring Material Parameters by Comparing Phase-Field Simulations with 4D Tomography Jin Zhang, Henning Poulsen, Stefan Poulsen, and Peter Voorhees |
| 11:20–11:40 |
ICTMS2017-166
Multi-scale Structure Investigations of Magnesium Alloys by XAFS-CT Satoru Yoshioka, Masanori Ishida, Kazuhiro Yasuda, Syo Matsumura, Shigeru Kimura, Yasuo Takeichi, Yasuhiro Niwa, and Masao Kimura |
| 11:40–12:00 |
ICTMS2017-124
Electron tomography in real and reciprocal space reveals atomic structure and vacancies in a luminescent copper chalcogenide Tom Willhammar, Gustaaf van Tendeloo, and Sara Bals |
|
Lunch break
|
|
| 14:30–14:50 |
ICTMS2017-73
Imaging structure formation in polymer solar cells by high resolution tomography and in situ x-ray scattering Jens Wenzel Andreasen, Emil Bøje Lind Pedersen, Arvid Piehl Lauritsen Böttiger, and Henrik Friis Dam |
| 14:50–15:10 |
ICTMS2017-13
Cycling induced sulfur diffusion in Lithium-Sulfur batteries revealed by lab-based X-ray tomography Shaogang Wang |
| 15:10–15:30 |
ICTMS2017-83
3D microstructural evolution of a solid oxide cell during a redox cycle by high resolution ptychographic tomography Salvatore De Angelis, Peter S. Jørgensen, Vincenzo Esposito, Kosova Kreka, Mirko Holler, Esther H. R. Tsai, and Jacob R. Bowen |
| 15:30–15:50 |
ICTMS2017-79
X-ray Tomography for Investigating Degradation and Water Transport in Polymer Electrolyte Fuel Cells Pratiti Mandal, Iryna Zenyuk, Shawn Litster, Adam Weber, Harold Barnard, Dilworth Parkinson, and Alastair McDowell |
| 15:50–16:10 |
ICTMS2017-22
Multi-Scale Image-Based Modeling of Effective Mass Transportation in a Novel-Fabricated Porous Solid Oxide Fuel Cell Anode Xuekun Lu, Tao Li, Kang Li, Dan Brett, and Paul Shearing |
|
Thursday, 29 June 2017 Room Stora Salen |
|
| 16:00–16:20 |
ICTMS2017-60
Quantifying the thermomechanical behaviour of heterogeneous polyurethane foams using 4D microstructural analysis Maarten Moesen, Kristof Verniers, YueQi Wang, Mark Brennan, and Jan Vandenbroeck |
| 16:20–16:40 |
ICTMS2017-184
Fast synchrotron X-ray tomography of dynamic processes in metallic foams Paul Hans Kamm, Francisco García-Moreno, Tillmann Robert Neu, Rajmund Mokso, and John Banhart |
| 16:40–17:00 |
ICTMS2017-157
3D geometry of hyperelastic hydrogels studied with fast lab x-ray tomography Edward Andò, Phou Ty, Jean-Marc Fromental, and Serge Mora |
| 17:00–17:20 |
ICTMS2017-167
Wicking in yarn with fast synchroton X-ray tomography Marcelo Parada, Dominique Derome, Rajmund Mokso, Christian M. Schlepütz, René Rossi, and Jan Carmeliet |
| 17:20–17:40 |
ICTMS2017-199
Probing the Growth and Dissolution of Quasicrystals in Real-Time Insung Han, Nancy Senabulya, Xianghui Xiao, and Ashwin Shahani |
|
Friday, 30 June 2017 Room Konsert Salen |
|
| 10:00–10:20 |
ICTMS2017-117
Exploring different approaches for 3D X-ray computed tomography imaging of composites Serafina Consuelo Garcea, Ying Wang, and Philip J Withers |
| 10:20–10:40 |
ICTMS2017-16
Full 3D damage characterisation of SiC/SiC composite tubes by X-ray tomography Yang Chen, Lionel Gélébart, Camille Chateau, Michel Bornert, Andrew King, Cédric Sauder, and Patrick Aimedieu |
| 10:40–11:00 |
ICTMS2017-54
Damage accumulation and tensile strength assessment in carbon/epoxy composites using high resolution computed tomography Sebastian Rosini |
| 11:00–11:20 |
ICTMS2017-128
In situ nanomechanical testing of Al-SiC nanolaminates using 3D X-ray Microscopy Hrishikesh Bale, Shashank Kaira, Somya Singh, Arno Merkle, and Nikhilesh Chawla |
| 11:20–11:40 |
ICTMS2017-174
HIGH TEMPERATURE SYNCHROTRON NANO HOLOTOMOGRAPHY TO FOLLOW THE SINTERING OF TiO2 NANO PARTICLES AGGLOMERATED AS MICROSPHERES Julien Lesseur, Catherine Elissalde, Patrick Mounaix, Julie Villanova, Pierre Lhuissier, and Dominique Bernard |
| 11:40–12:00 |
ICTMS2017-23
Talbot-Lau grating interferometer XCT for porosity determination in CFRP with metal components in comparison to other NDT inspection methods Christian Gusenbauer, Michael Reiter, Bernhard Plank, Günther Mayr, Stefanie Renner, Elisabeth Leiss-Holzinger, Bernhard Reitinger, Peter Burgholzer, Martin Barth, Bernd Köhler, and Johann Kastner |